Either probe identified in paragraph 126.96.36.199 may be used depending primarily on the ease of
accessibility and user friendliness. If the probes are changed, steps 188.8.131.52 b. (1), (2), and (3)
shall be repeated each time a change is made.
184.108.40.206 Marking and Recording of Inspection Results. Mark and record inspection results as required by paragraph 1.3.
2.30.4 Backup Method. None required.
2.30.5 System Securing. The tail rotor inboard/outboard retention plates, if removed, require installation in accordance
with the applicable technical manuals listed in Table 1-1.