Figure 4. Lateral accelerometer Installation on Forward Transmission Bulkhead
PROCEDURE 3: ACCELEROMETER INSTALLATION
a. Install accelerometer (PN 28110900) on accelerometer mounting bracket (29313000). Mount accelerometer
bracket (PN 29313000) at the top of the forward transmission bulkhead using one of the 5/16-inch tapped tie
ring holes. The orientation of the accelerometer must be horizontal, figure 4, with the connector pointing to the
left side of the aircraft (to your right when you are facing the bulkhead).
b. Connect accelerometer cable (29105605) from accelerometer to the DAU receptacle marked ACC1.
c. Install accelerometer (28110900) on accelerometer mounting bracket (29313000). Mount accelerometer
bracket on the existing screw at the bottom edge of the instrument panel, see figure 5. Place it to the right of
the ashtray by the co-pilot's right knee, with the connector facing down.
d. Connect accelerometer cable (29105600) from accelerometer to the DAU receptacle marked ACC2.
View Looking Aft