TM 1-1520-265-23
Figure 4-10. Troop/Cargo Door Upper Track
a.
Place probe on a good area in the inspection location and null. Adjust phase as required to obtain horizontal lift-
off.
b.
Inspect the part.
c.
Any signal similar to the notches in the test block are cause for rejection.
NOTE
Either probe identified in paragraph 4.10.3.1 may be used depending primarily on the ease of
accessibility and user friendliness. If the probes are changed, steps 4.10.3.5 b. (1), (2), and (3)
shall be repeated each time a change is made.
4.10.3.7
Marking and Recording of Inspection Results. Mark and record inspection results as required by paragraph
1.3.
4.10.4
Backup Method. None required.
4.10.5
System Securing. The cargo door upper track, if removed, requires installation in accordance with the
applicable technical manuals listed in Table 1-1.
4-26
