NATIONAL STOCK NUMBER
Parts to be Inspected.
a. On all H-60 aircraft, check aircraft records for installed spindle retention rods, P/N
70102-08102-102/103 with serial numbers falling within the range of 33129-3 through 33129-242 in spindle
assemblies. If the specified retention rod is not installed, the inspection is complete.
b. lf the specified retention rod identified in paragraph 8.a. is installed, the report identified in paragraph
9. Correction Procedures. Replace
all spindle assemblies listed in paragraph
rods P/N 70102-08102-102/103 installed that are manufactured by the Purdy corporation, cage 15152, serial
numbers 33129-3 through 33129-242. Replacement of suspect assemblies shall be accomplished immedi-
ately if the total flight hours on spindle retention rod is 1100 hours or greater. Spindle assemblies that have
a suspect retention rod installed that has not reached the 1100 hour retirement life shall be replaced at a maxi-
mum of one calendar year from the date of this TB regardless to whether or not the retention rod reaches
the reduced retirement life of 1100 hours. Update block 6J for the rod on the spindle assembly DA Form
2408-16 with the new retirement life. Make an entry on the DA Form 2408-18 for each spindle requiring rod
replacement on calendar year from the date of this TB. lnclude the spindle assembly serial number in the
entry. ULLS-A users, add the revised retirement life of the affected retention rods in the master component
file using a configuration code of 39. Add the one year replacement time of the affected retention rods as
an 800 inspection in the master inspection file. By no means shall the 1100 hour retirement life be overflown
in this one year time frame.
10. Supply/Parts and Disposition.
a. Parts Required. Items cited in paragraph 6 may be required to replace defective items.
b. Requisitioning Instructions. Requisition replacement parts through normal supply channels using
normal supply procedures. All requisitions must include project code (CC57-59) XDA per this TB. Project
code is required to track and establish a data base of stock fund expenditures incurred by the field as a result
of ASAM/SOF actions.
Bulk and Consumable Materials. N/A.
d. Disposition. Dispose of removed parts/components using normal supply procedures. All turn-in doc-
uments must include project code (CC57-59) XDA.
Disposition of Hazardous Material. N/A.
11. Special Tools, Jigs and Fixtures Required. N/A.