TM 1-1520-265-23
Figure 2-24. Tail Rotor Blade Tip Cap
NOTE
Either probe identified in paragraph 2.24.3.1 may be used depending primarily on the ease of
accessibility and user friendliness. If the probes are changed, steps 2.24.3.5 b. (1), (2), and (3)
shall be repeated each time a change is made.
2.24.3.7 Marking and Recording of Inspection Results. Mark and record inspection results as required by paragraph 1.3.
2.24.4 Backup Method. None required.
2.24.5 System Securing. None required.
2.25 TAIL ROTOR PITCH HORN (ET).
2.25.1 Description (Figure 2-1. Index No.25). The tail rotor pitch horn transmits input from the pitch control rod to
change pitch of the tail rotor blades.
2.25.2 Defects. This inspection is used to verify crack indications found visually on the tail rotor pitch horn. No cracks
are allowed.
2.25.3 Primary Method. Eddy Current.
2-59
