0043 00
TM 1-6625-724-13&P
0043 00-2
b. INSTALLATION:
1. Install new power supply card (9) into card guides (11) pushing card into back plane connector (10).
2. Apply thread-lock adhesive (item 1, WP0066 00) on threaded hardware.
3. Install PWA hold-down bracket (7) into the card cage (5) using two screws (top and bottom) (6).
4. Install enclosure (4) on to card cage (5).
5. Install four screws (1), four lock washers (2), and four flat washers (3) through four holes in the enclosure
(4) into the card cage (5).
Figure 1. DAU Power Supply PWA Removal and Installation
END OF WORK PACKAGE
