TM 1-6625-724-13&P0042 000042 00-1DAU FANREMOVAL AND INSTALLATIONIndexRemoval............................................................................................................................................................................ 1Installation......................................................................................................................................................................... 1InitialSetup:PersonnelRequired:TMDE Support SpecialistToolsandEquipment:Tool Kit, ElectriciansParts/Materials:DAU Fan PN 28113202, Thread-lock adhesiveEquipmentCondition:DAU on workbencha. REMOVAL:1. Remove four screws (1), four lock washers (2), and four flat washers (3) from enclosure (4).2. Remove enclosure (4) from card cage (5).3. Disconnect power terminal lug (6) from PWA back plane (7).4. Pull wire and power terminal lug (6) out through access hole (8).5. Remove screw (9), lock washer (10), and terminal lug ring (11).6. Remove four screws (12), four lock washers (13), and four flat washers (14).7. The fan and cable assembly (15) are now available to be replaced.b. INSTALLATION:1. Apply thread-lock adhesive to threaded hardware.2. Install four screws (12), four lock washers (13), and four flat washers (14) through mounting holes in fan(15) into pre-threaded holes of the card cage (5).3. Install screw (9), lock washer (10), and terminal lug ring (11) into pre-threaded hole of card cage (5).4. Pass power terminal lug (6) through access hole (8) and connect onto PWA back plane (7).5. Install enclosure (4) on to card cage (5).6. Install four screws (1), four lock washers (2), and four flat washers (3) through four holes in the enclosure(4) into the card cage (5).
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
