TM 1-6625-724-13&P
0044 00
0044 00-1
DAU PROCESSOR PWA
REMOVAL AND INSTALLATION
CAUTION
This assembly contains parts sensitive to damage
by Electrostatic Discharge (ESD).
Use precautionary ESD procedures when touching,
removing or inserting. Use static-free material to
wrap the assembly for shipment or storage.
Index
Removal............................................................................................................................................................................ 1
Installation......................................................................................................................................................................... 2
Initial Setup:
Personnel Required:
TMDE Support Specialist
Tools and Equipment:
Tool Kit, Electricians
Parts/Materials:
PWA PN 29356504, Thread-lock adhesive
Equipment Condition:
Place DAU on workbench with ESD capability.
CAUTION
This assembly contains parts sensitive to damage
by Electrostatic Discharge (ESD).
Use precautionary ESD procedures when touching,
removing or inserting. Use static-free material to
wrap the assembly for shipment or storage.
a. REMOVAL:
1. Remove four screws (1), four lock washers (2), and four flat washers (3) from enclosure (4).
2. Remove enclosure (4) from card cage (5).
3. Remove two screws (top and bottom) (6) from PWA hold-down bracket (7).
4. Remove PWA hold-down bracket (7).
5. Rotate extractors (8) to loosen processor card (9) from back plane connectors (10).
6. Pull processor card (9) out of card cage (5).
