0045 00
TM 1-6625-724-13&P
0045 00-2
6. Pull acquisition card (9) out of card cage (5).
b. INSTALLATION:
1. Apply thread-lock adhesive to threaded hardware.
2. Install new acquisition card (9) into card guides (11) pushing card into back plane connectors (10).
3. Install PWA hold-down bracket (7) into the card cage (5) using two screws (top and bottom) (6).
4. Install enclosure (4) onto card cage (5).
5. Install four screws (1), four lock washers (2), and four flat washers (3) through four holes in the enclosure
(4) into the card cage (5).
Figure 1. DAU Acquisition PWA Removal and Installation
END OF WORK PACKAGE
