0046 00
TM 1-6625-724-13&P
0046 00-2
5. Rotate extractor (8) to loosen acquisition card (9) from back plane connectors (10).
6. Pull acquisition card (9) from card cage (5).
7. Rotate extractor (11) to loosen processor card (12) from back plane connectors (10).
8. Pull processor card (12) from card cage (5).
9. Rotate extractor (13) to loosen power supply card (14) from back plane connectors (10).
10. Pull power supply card (14) from card cage (5).
11. Remove four hex nuts (16), and four lock washers (17) from four positioning bolts (18).
12. Remove front panel assembly (19) from card cage (5).
13. Remove two cable connectors (20 and 21) and two terminal rings (22) from PWA back plane (23).
b. INSTALLATION:
1. Connect two cable connectors (20 and 21) and two terminal rings (22) onto PWA back plane (23).
2. Install front panel assembly (19) onto card cage (5) four positioning bolts (18), and attach with four hex nuts
(16), and four lock washers (17).
3. Install acquisition card (9) into card guides (15) pushing card into back plane connectors (10).
4. Install processor card (12) into card guides (15) pushing card into back plane connectors (10).
5. Install power supply card (14) into card guides (15) pushing card into back plane connectors (10).
6. Apply thread-lock adhesive (item 1, WP0066 00) to threaded hardware.
7. Install PWA hold-down guide (7) in place in the card cage (5) using two screws (top and bottom) (6).
8. Install enclosure (4) onto card cage (5).
9. Install four screws (1), four lock washers (2), and four flat washers (3) through four holes in the enclosure
(4) into the card cage (5).
