0047 00
TM 1-6625-724-13&P
0047 00-2
6. Pull acquisition card (9) from card cage (5).
7. Rotate extractor (11) to loosen processor card (12) from back plane connectors (10).
8. Pull processor card (11) from card cage (5).
9. Rotate extractor (13) to loosen power supply card (14) from back plane connectors (10).
10. Pull power supply card (14) from card cage (5).
11. Remove faulty card guide (15) from card cage (5).
12. Card guide (15) is now available to be replaced.
b. INSTALLATION:
1. Install new card guide (15) in mounting holes of card cage (5).
2. Install acquisition card (9) into card guides (15) pushing card into back plane connectors (10).
3. Install processor card (12) into card guides (15) pushing card into back plane connectors (10).
4. Install power supply card (14) into card guides (15) pushing card into back plane connectors (10).
5. Apply thread-lock adhesive (item 1, WP0066 00) to threaded hardware.
6. Install PWA hold-down bracket (7) in place in the card cage (5) using two screws (top and bottom) (6).
7. Install enclosure (4) onto card cage (5).
8. Install four screws (1), four lock washers (2), and four flat washers (3) through four holes in the enclosure
(4) into the card cage (5).
