UTD CONVEX LENS REMOVAL AND INSTALLATION

UTD WINDOW LENS REMOVAL AND INSTALLATION

Figure 1. UTD Convex Lens Removal and Installation

TM-1-6625-724-13P Aviation Vibration Analyzer Manual
Page Navigation
186

TM 1-6625-724-13&P 0057 00 0057 00-1 UTD CONVEX LENS REMOVAL AND INSTALLATION Index Removal............................................................................................................................................................................ 1 Installation......................................................................................................................................................................... 1 Initial Setup: Personnel Required: TMDE Support Specialist Tools and Equipment: Tool Kit, Electricians Parts/Materials: Lens PN 28128500 or 10.0145, Thread-lock adhesive Equipment Condition: Place UTD on workbench. a. REMOVAL: 1. Remove six screws (1) and six flat washers (2) from top body (3). 2. Remove lens enclosure (4). 3. Remove window lens gasket (5) and window lens (6). 4. Remove three screws (7). 5. Remove lens retaining ring (8). 6. Remove O-ring (9). 7. Remove convex lens (10) for replacement. b. INSTALLATION: 1. Install convex lens (10) into seat in top body (3). 2. Install O-ring (9). 3. Apply thread-lock adhesive on threaded hardware. 4. Install lens retaining ring (8) using three screws (7). 5. Install window lens (6). 6. Install window lens gasket (5). 7. Install lens enclosure (4). 8. Install six screws (1) and six flat washers (2).

Privacy Statement
Press Release
Contact