0071 00
TM 1-6625-724-13&P
0071 00-12
TASK 1 TEST EQUIPMENT INSTALLATION/CHECKOUT
c. Place a single, 5-ft strip of reflective tape on the underside, trailing edge (on the trim tab) of each blade from
tab pocket 0 to tab pocket 5 as shown in figure 6. Ensure that the tape is smooth and as straight as possible
using the edge of the blade as a reference.
d. If verification of the reflective tape placement is desired, it can be viewed by holding a flashlight alongside your
head and shining it at the rotating blades. Any sections that do not return the light evenly across the tape
should be replaced.
Figure 6. Placement of Reflective Tape on Rotor Blades
PROCEDURE 6: SCRIPT FILE SELECTION
Available AH-64 script files are as follows:
Aircraft Type
With on-board accels
With external accels (SPU Bypass)
AH-64A
AH64_R.CMD
AH64NB_R.CMD
AH-64D
AH64D_R.CMD
AH64D2_R.CMD