0072 00
TM 1-6625-724-13&P
0072 00-6
Figure 3. Magnetic RPM Sensor and Lateral Accelerometer Installation
c. Mount the bracket with a second nut and tighten. This will "pinch” the bracket tightly between the two nuts.
NOTE
If the second nut cannot be obtained, then the bracket
can be mounted by first removing the nut from the
transmission stud, placing the accelerometer mounting
bracket over the transmission stud, and then reinstalling
the nut.
d. Install accelerometer (28110900) on accelerometer mounting bracket (29313000).
e. Connect accelerometer cable (29105600) from accelerometer to the DAU receptacle marked ACC1.
f. Mount accelerometer bracket (29313000) on left side of instrument panel using aircraft panel screw at
approximate location of co-pilot's right knee (see figure 4).
g. Install accelerometer (28110900) on accelerometer mounting bracket so that the connector is pointing down.
h. Connect accelerometer cable (29105600) from accelerometer to the DAU receptacle marked ACC2.
Figure 4. Vertical Accelerometer Installation
Magnetic RPM Sensor
Lateral Accelerometer
