Figure 2. DPL Booting Window

TURN ON/OFF PROCEDURES AVIATION VIBRATION ANALYZER

TM-1-6625-724-13P Aviation Vibration Analyzer Manual
Page Navigation
35

0007 00 TM 1-6625-724-13&P 0007 00-2 This screen is prompting the user for input. The user must press 1 to proceed with normal operation , 2 to go into host communication to use the RADSCOM interface, 3 to load aircraft setup files from the credit card memory, 4 to perform a modem setup, or 5 to select the Help menu. Because there is no default, this screen will wait for one of these five keys to be pressed. (a) If the user selects option 1, normal system operation will begin and the DPL Booting Window will appear as shown in figure 2. Booting DPL Please Wait Copyright © 1988-1999 By Signal Processing Systems Figure 2. DPL Booting Window After booting is completed the first Main Menu will appear as shown in figure 3, except that RADS-AT VERSION 7.01 will always be followed by the most current software enhancement level code. For example: VERSION 7.01AA51D. SIGNAL PROCESSING SYSTEMS - SHL RADS-AT VERSION 7.01XXXXX 1-AUG-01 00:01:01 Aircraft Type UH60 7.1 [DO] = Select Highlighted item [QUIT] = Clear Highlighted Item MEASURE DISPLAY DIAGS MANAGER Tail Number 8243934 Flight Plan FLIGHT Flight I.D. 1-AUG-01 at 06:01 Figure 3. Main Menu (b) If the user selects option 2, the following additional instructions will be displayed: Connect the PC to HOST cable between the RS232 ports of the CADU and the HOST computer (c) If the user selects option 3 and a CCM is installed, a menu will appear showing the following display (example selections): **********Load Aircraft Setup Files""""" Enter the number of your choice below: Press QUIT to exit 1 AH64_r 7.01 2 CH47_r 7.01 3 UH60_r 7.01 Choice?

Privacy Statement
Press Release
Contact