Figure 2. DPL Booting Window CONT.

TM-1-6625-724-13P Aviation Vibration Analyzer Manual
Page Navigation
36

TM 1-6625-724-13&P 0007 00 0007 00-3 NOTE The actual aircraft that are displayed may vary depending upon the configuration of the credit card memory. The CCM capacity is smaller than the CADU memory. If no aircraft setup files are currently stored on the CCM, this menu will not appear. (d) If the user selects option 4, the following additional instructions will be displayed: Connect a Hayes compatible modem to a NULL- MODEM. Connect the RS232 port of the CADU to the NULL-MODEM using the ‘CADU HOST’ cable. Connect the phone cable to the modem. Select the baud rate for your modem: 1: 1200 BAUD 2: 2400 BAUD 3: Return to the main menu Select (1, 2, or 3): (e) If the user selects option 5, the following additional instructions will be displayed: **********HELP MENU********** 1: Proceed with normal operation. This starts the measurement and the diagnostic program. 2: Set up for host communication. Allows access to the serial port for initializing the RADS-AT, unloading and loading of stored data to and from a host computer (PC), Use RADSCOM diskette with this option. Press any key to continue **********HELP MENU********** 3: Load aircraft specific setup file Use this option to load aircraft setup files from the Credit Card into the database. WARNING: Aircraft setup files already loaded into the system, will be overwritten by any new setup files loaded that are specifying the same aircraft type. Press any key to continue **********HELP MENU********** 4: Modem Setup This option is used to allow a remote communication with the RADS-AT. Connect a Hayes compatible modem to a NULL-MODEM. Connect the RS232 port of the CADU to the NULL-MODEM using the 'CADU to HOST' cable. Connect the phone cable to the modem. Select the Baud rate for your modem: 1:1200 BAUD 2:2400 BAUD

Privacy Statement
Press Release
Contact