Table 1. Error Reported on CADU Error Screen (cont.)

Table 1. Error Reported on CADU Error Screen (cont.) - TM-1-6625-724-13P_168

Table 1. Error Reported on CADU Error Screen (cont.) - TM-1-6625-724-13P_170

TM-1-6625-724-13P Aviation Vibration Analyzer Manual
Page Navigation
122

TM 1-6625-724-13&P 0025 00 0025 00-31 Table 1. Error Reported on CADU Error Screen (cont.) Code # Message 32738: Overflow In HEX-to-INT Conversion Send unit to TMDE for repair. 32747: Illegal Data Read from DAU Send unit to TMDE for repair. 32748: Illegal Unit Conversion Send unit to TMDE for repair. 32752: CADU Is Not Receiving External Power From The DAU ACTION: (1) Check CADU to DAU cable (2) Check that DAU's power switch is on (3) Reboot DAU 32753: No Flight Data Present 32754: User Quit Measurement The user pressed the QUIT key during an acquisition to abort the acquisition. Repeat the desired acquisitions. 32755: No Valid Track Data There was no valid track data measured. Repeat the measurement and correct any track fault problems. 32756: CADU-DAU Comms Failure ACTION: (1) Repeat key sequence (2) Reboot CADU There has been an unexplained communication failure. Repeat the last measurement. If that does not work, turn the DAU power off and on. If that does not work, reboot the CADU. 32757: Power Failure, Repeat Test State There has been an inadvertent power failure during acquisition. Repeat the last Test State. 32758: Not Enough Data to Do Trending Not enough data exist to do trending. There is probably no or a single flight worth of data. Collect more data to do trending. 32759: Can Not Find Test State ACTION: Check setup defined In aircraft script file AND/OR Reload aircraft script file No Test States exist for the current Flight Plan. This is due to an error in the selected aircraft configuration file. 32760: No or Inconsistent Data For Display No data has been collected for the given Test State and selected aircraft. 32761 Can not Find Display ACTION: Check setup defined in aircraft script file AND/OR Reload aircraft script file No display setup exists for the selected Test State. This is probably due to an error in the aircraft configuration file. 32762: Measurement Failed This error occurs after a failed measurement attempt. It usually occurs after some other sort of failure. Repeat the desired measurement.

Privacy Statement
Press Release
Contact