TM 1-6625-724-13&P
0036 00
0036 00-1
CADU PRINTED WIRING ASSEMBLY (PWA)
REMOVAL AND INSTALLATION
CAUTION
This assembly contains parts sensitive to damage
by Electrostatic Discharge (ESD).
Use precautionary ESD procedures when touching,
removing or inserting. Use static-free material to
wrap the assembly for shipment or storage.
Index
Removal............................................................................................................................................................................ 1
Installation......................................................................................................................................................................... 2
Initial Setup:
Workbench with ESD capability
Personnel Required:
TMDE Support Specialist
Tools and Equipment:
Tool Kit, Electricians
Parts/Materials:
PWA, PN 29324607, Thread-lock adhesive, Permabond 910, Lens Cleaner,
Lint-free cloth, Lint-free pad, Dry-forced air
Equipment Condition:
CADU power turned off. Lay unit with keypad down on support strips to protect
facing.
CAUTION
This assembly contains parts sensitive to damage
by Electrostatic Discharge (ESD).
Use precautionary ESD procedures when touching,
removing or inserting. Use static-free material to
wrap the assembly for shipment or storage.
a. REMOVAL:
1. Remove nine screws (1), nine lock washers (2), and nine flat washers (3) from bottom plate (4).
2. Remove bottom plate (4) from top case (5).
3. Disconnect battery cable connector (6) from J6 on the PWA.