TM 1-6625-724-13&P
0025 00
0025 00-17
Table 1. Error Reported on CADU Error Screen (cont.)
Code #
Message
4127:
DAC Filter Ripple Error ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make
a measurement (3) If error persists, possible hardware failure
The internal DAC filter test has failed on calibration. Power the DAU off and on, and then try to
make a measurement. If the failure persists, send unit to TMDE for repair.
4128:
Filter 1 Gain Tolerance ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make a
measurement (3) If error persists, possible hardware failure
The filter 1 gain tolerance is larger than 2% and has failed its calibration test on power up.
Power the DAU off and on, and then try to make a measurement. If the failure persists, send unit
to TMDE for repair. Suspect failure of DAU Acquisition board.
4129:
Filter 2 Gain Tolerance ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make a
measurement (3) If error persists, possible hardware failure
The filter 2 gain tolerance is larger than 2% and has failed its calibration test on power up.
Power the DAU off and on, and then try to make a measurement. If the failure persists, send unit
to TMDE for repair. Suspect failure of DAU Acquisition board.
4130:
Filter 3 Gain Tolerance ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make a
measurement (3) If error persists, possible hardware failure
The filter 3 gain tolerance is larger than 2% and has failed its calibration test on power up.
Power the DAU off and on, and then try to make a measurement. If the failure persists, send unit
to TMDE for repair. Suspect failure of DAU Acquisition board.
4131:
Filter 4 Gain Tolerance ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make a
measurement (3) If error persists, possible hardware failure
The filter 4 gain tolerance is larger than 2% and has failed its calibration test on power up.
Power the DAU off and on, and then try to make a measurement. If the failure persists, send unit
to TMDE for repair. Suspect failure of DAU Acquisition board.
4132:
Filter 5 Gain Tolerance ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make a
measurement (3) If error persists, possible hardware failure
The filter 5 gain tolerance is larger than 2% and has failed its calibration test on power up.
Power the DAU off and on, and then try to make a measurement. If the failure persists, send unit
to TMDE for repair. Suspect failure of DAU Acquisition board.
4133:
Filter 6 Gain Tolerance ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make a
measurement (3) If error persists, possible hardware failure
The filter 6 gain tolerance is larger than 2% and has failed its calibration test on power up.
Power the DAU off and on, and then try to make a measurement. If the failure persists, send unit
to TMDE for repair. Suspect failure of DAU Acquisition board.
4144:
Multiple Measurement Failure: view error log ACTION: (1) Power the DAU off and on (2)
Wait 20 seconds, make a measurement
4145:
Accelerometer Failure on Input 1 ACTION: (1) Check cable (2) Check accelerometer (3)
Verify SETUP (also go to Setup/Status in Manager Menu)
4146:
Accelerometer Failure on Input 2 ACTION: (1) Check cable (2) Check accelerometer (3)
Verify SETUP (also go to Setup/Status In Manager Menu)
4147:
Accelerometer Failure on Input 3 ACTION: (1) Check cable (2) Check accelerometer (3)
Verify SETUP (also go to Setup/Status In Manager Menu)
