This  assembly  contains  parts  sensitive  to  damage by Electrostatic Discharge (ESD). Use  precautionary  ESD  procedures  when  touching, removing  or  inserting.    Use  static-free  material  to wrap the assembly for shipment or storage. Index Removal............................................................................................................................................................................ 1 Installation......................................................................................................................................................................... 2 Initial Setup: Workbench with ESD capability Personnel Required: TMDE Support Specialist Tools and Equipment: Tool Kit, Electricians Parts/Materials: Lens PN 29323200, Lens Gasket PN 29324400, Silicone adhesive, Thread-lock adhesive, Permabond 910, Lens Cleaner, Lint-free cloth, Lint-free pad, Dry- forced air Equipment Condition: CADU power turned off.  Lay unit with keypad down on support strips to protect facing. CAUTION This  assembly  contains  parts  sensitive  to  damage by Electrostatic Discharge (ESD). Use  precautionary  ESD  procedures  when  touching, removing  or  inserting.    Use  static-free  material  to wrap the assembly for shipment or storage. a.    REMOVAL: 1. Remove nine screws (1), nine lock washers (2), and nine flat washers (3) from bottom plate (4). 2. Remove bottom plate (4) from top case (5).  Disconnect battery cable connector (6) from J6 on the PWA.