TM 1-6625-724-13&P
0052 00
0052 00-1
UTD CABLE ASSEMBLY
REMOVAL AND INSTALLATION
CAUTION
This assembly contains parts sensitive to damage
by Electrostatic Discharge (ESD).
Use precautionary ESD procedures when touching,
removing or inserting. Use static-free material to
wrap the assembly for shipment or storage.
Index
Removal............................................................................................................................................................................ 1
Installation......................................................................................................................................................................... 2
Initial Setup:
Personnel Required:
TMDE Support Specialist
Tools and Equipment:
Tool Kit, Electricians
Parts/Materials:
Cable Assembly PN 29310800, Thread-lock adhesive, Silicone adhesive
Equipment Condition:
UTD on workbench with ESD capability
CAUTION
This assembly contains parts sensitive to damage
by Electrostatic Discharge (ESD).
Use precautionary ESD procedures when touching,
removing or inserting. Use static-free material to
wrap the assembly for shipment or storage.
a. REMOVAL:
1. Remove eight screws (1), eight flat washers (2), eight hex nuts (3), and eight flat washers (4) from base (5).
2. Using a sharp knife, break seal and remove base (5) with O ring (6) from top body (7).
3. Remove two screws (8), two split lock washers (9), and two flat washers (10) from lower section of PWA
(11).
