TM 1-6625-724-13&P
0025 00
0025 00-23
Table 1. Error Reported on CADU Error Screen (cont.)
Code #
Message
4232:
Illegal Output Type ACTION: (1) Retry Measurement (2) Verify SETUP - Check and Reload
aircraft script file
The output type specified for ASPA or SSPA measurements is an incorrect type. Verify aircraft
setup file.
4233:
Illegal Number of Revs ACTION: (1) Retry Measurement (2) Verify SETUP – Check and
Reload aircraft script file
The number of revs. specified in the aircraft setup file is incorrect. Verify the aircraft setup file.
4234:
Missing Ratio Command ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make
a measurement
4235:
Missing Strobe Command ACTION: (1) Power the DAU off and on (2) Wait 20 seconds,
make a measurement
4236:
Number out of Range ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make a
measurement
4237:
Illegal Data Set ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make a
measurement
4238:
No Rotor Parameters ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make a
measurement
4239:
Accelerometer Saturation on Accelerometer Channel 1 ACTION: (1) Verify Setup (Setup
Status In Manager Menu) (2) Change accelerometer Type (3) Relocate accelerometer
4240:
Accelerometer Saturation on Accelerometer Channel 2 ACTION: (1) Verify Setup (Setup
Status in Manager Menu) (2) Change accelerometer Type (3) Relocate accelerometer
4241:
Accelerometer Saturation on Accelerometer Channel 3 ACTION: (1) Verify Setup (Setup
Status in Manager Menu) (2) Change accelerometer Type (3) Relocate accelerometer
4242:
Accelerometer Saturation on Accelerometer Channel 4 ACTION: (1) Verify Setup (Setup
Status in Manager Menu) (2) Change accelerometer Type (3) Relocate accelerometer
4243:
Accelerometer Saturation on Accelerometer Channel 5 ACTION: (1) Verify Setup (Setup
Status In Manager Menu) (2) Change accelerometer Type (3) Relocate accelerometer
4244:
Accelerometer Saturation on Accelerometer Channel 6 ACTION: (1) Verify Setup (Setup
Status in Manager Menu) (2) Change accelerometer Type (3) Relocate accelerometer
4245:
Accelerometer Saturation on Accelerometer Channel 7 ACTION: (1) Verify Setup (Setup
Status in Manager Menu) (2) Change accelerometer Type (3) Relocate accelerometer
4246:
Accelerometer Saturation on Accelerometer Channel 8 ACTION: (1) Verify Setup (Setup
Status in Manager Menu) (2) Change accelerometer Type (3) Relocate accelerometer
4247:
Accelerometer Saturation on Accelerometer Channel 9 ACTION: (1) Verify Setup (Setup
Status in Manager Menu) (2) Change accelerometer Type (3) Relocate accelerometer
4248:
Accelerometer Saturation on Accelerometer Channel 10 ACTION: (1) Verify Setup (Setup
Status in Manager Menu) (2) Change accelerometer Type (3) Relocate accelerometer
