TM 1-6625-724-13&P
0025 00
0025 00-25
Table 1. Error Reported on CADU Error Screen (cont.)
Code #
Message
16390:
Sensor Fault on Internal Channel 4 ACTION: (1) Check cable (2) Check accelerometer -
find channel associated with position number above, In script file
16391:
Bad Accelerometer Type ACTION: (1) Retry measurement (2) Verify Setup – Check and
Reload aircraft script file
The accelerometer type specified in the aircraft setup file is incorrect. Verify accelerometer type
in the aircraft setup file.
16392:
Illegal Channel Number ACTION: (1) Retry measurement (2) Verify Setup - Check and
Reload aircraft script file
The accelerometer channel specified in the aircraft setup file is incorrect. Verify the channel
setups in the aircraft setup file.
16393:
ACQ Min Limit > Max Limit ACTION: (1) Power the DAU off and on (2) Wait 20 seconds,
make a measurement
16394:
Bad Power of 2 for Strobe Adjust ACTION: (1) Power the DAU off and on (2) Wait 20
seconds, make a measurement
16395:
Gain - Illegal Number of Samples ACTION: (1) Power the DAU off and on (2) Wait 20
seconds, make a measurement
16396:
Cal - Illegal Number of Samples ACTION: (1) Power the DAU off and on (2) Wait 20
seconds, make a measurement
16397:
Illegal Oversampling Factor ACTION: (1) Power the DAU off and on (2) Wait 20 seconds,
make a measurement
16398:
Illegal Filter Selected ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make a
measurement
16399:
Flash Rate Too Big or Zero ACTION: (1) Power the DAU off and on (2) Wait 20 seconds,
make a measurement
16400:
Illegal Gain Setting ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make a
measurement
16401:
Could Not Start Acquisition ACTION: (1) Power the DAU off and on (2) Wait 20 seconds,
make a measurement
16402:
Illegal Physical Channel ACTION: (1) Retry measurement (2) Verify Setup – Check and
Reload aircraft script file
The physical channel in the aircraft setup file is specified incorrectly. Verify the aircraft setup file.
16403:
Illegal Sample Rate ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make a
measurement
16404:
Illegal Rev Count ACTION: (1) Power the DAU off and on (2) Wait 20 seconds, make a
measurement
